| |
Prod. Id. |
Description |
RRP |
|
 |
PA-PHB |
Padded Headset Bag |
$15.00 |
|
 |
PA-HHB |
Hard Headset Bag - clam shell style |
$25.00 |
|
 |
PA-HP12.8 |
Pillow Headpad as used on PA12.8 |
$7.90
|
|
 |
PA-SHP |
Replacement Super Cushion Headpad |
$15.00
|
|
 |
PA-DUAL |
Dual Layer Silicone Gel ear seals offering
superior comfort - suits all David Clark clones |
$35.00 |
|
 |
PA-CON |
Temperature-sensitive
Confor foam core ear seals. Smooth, soft, washable leatherette covering over foam
core. Great with eyewear or earrings. - suits all
David Clark clones |
$35.00
|
|
 |
PA-FOAM |
Basic foam/air ear seals - suits all
David Clark clones |
$9.90 |
|
 |
PA-CC |
Cloth Comfort Covers - black in colour |
$6.90 |
 |
PA-10S |
Replacement Mic Muff - small (24x40mm) |
$2.50
|
|
|
PA-10M |
Replacement Mic Muff - medium (27x50mm) |
$2.50 |
|
|
PA-10L |
Replacement Mic Muff - large (32x55mm) |
$2.50 |
 |
PA-3 |
Replacement Dynamic Noise
Cancelling Microphone - is not amplified.
To use in a GA headset will need an amplifier such as
our PA-AMP which is sold separately. Is designed to be mounted on
flexible type microphone booms such as our PA-FF and PA-MF. It is 26mm in
diameter and 13mm deep. |
$25.00 |
 |
PA-AMP |
Amplifier for use
with PA-3 Dynamic Microphone. Comes complete with wiring
SCHEMATIC. |
$15.00 |
 |
PA-5B |
Replacement Electret
Noise Cancelling Microphone - Black
- as used on P-51 headset |
$25.00 |
 |
PA-7B |
Replacement Electret
Noise Cancelling Microphone - Black
- as used on PA11-60, PA11-20 & PA12.8 headset |
$25.00 |
 |
PA-HNM |
Extreme High Noise
Electret Noise Cancelling Microphone - designed to fit on flexible booms.
Designed for use in extreme high noise aircraft such as crop dusters,
warbirds and helicopters. |
$79.00 |
 |
ML-HS |
Replacement Microphone Lead -
320mm lead with U173/U style plug. This has thicker wire for use with wire
booms. |
$4.95 |
|
|
ML-FLEX |
Replacement Microphone Lead -
320mm lead with U173/U style plug. This has a thin wire for use with flexible
booms. |
$4.95
|
 |
ML-PATCH |
Patch cable - 230mm lead with U173/U
style plugs on each end. Used with PA5 mic when converting H10-30 to electret
mic. |
$8.90 |
|
|
ML-HELMET |
Replacement Mic
lead for use on helmets- 300mm lead with U173/U style plugs on each end.
|
$8.90 |
 |
MB-WS |
Replacement
Mike Boom - wire swivel type |
$12.50
|
 |
MB-WH |
Replacement Mike Boom - wire hinged
type |
$12.50 |
 |
MB-MF |
Replacement Mike Boom - half wire/half
flexible |
$19.50 |
 |
MB-FF |
Replacement
Mike Boom - fully flexible type |
$19.50 |
 |
MBP |
Replacement
Mike Boom Post for wire booms |
$11.90
|
 |
HB |
Replacement Headband - Spring Steel -
available in small, medium (standard) and large. Suits most David Clark
clones |
$8.90 |
 |
HSS-300 |
Replacement Headset Speaker - 300ohm |
$9.90 |
 |
VOL-D |
Replacement Headset
Volume Control |
$5.00 |
 |
VOL-K |
Replacement Volume Control Knob |
$2.00 |
 |
HSL-MC |
Replacement Headset Lead - Mono - Chrome Plugs |
$25.00 |
|
|
HSL-SC |
Replacement Headset Lead - Stereo with
switch in Y-block - Chrome Plugs |
$25.00 |
 |
HSL-H |
Replacement Helicopter Headset Lead -
Coiled lead with single U174/U NATO style plug. |
$45.00 |
 |
TP120B
(U174/U) |
Four Conductor NATO type helicopter
plug. Mates with NEXUS Series TJ102 (U92A/U) jacks. One piece nickel plated brass contacts are integrally
molded into plastic body. |
$19.50 |
 |
TJ102
(U92A/U) |
Four Conductor NATO type helicopter
jack. Mates with NEXUS Series TP120 (U174/U)
plugs. Nickel plated beryllium copper contacts anchored in a glass filled
nylon body. |
$25.00 |
